Used Gear for sale

iColor Cove# MX Powercore is the highest-intensity member of the iColor Cove family. It applies Powercore# technology, which simplifies installation by integrating power and data management directly within the fixture, eliminating the need for external low-voltage power/data supplies.

12# (30.5 cm)
Technology provides uniform color mixing with maximized output
70° x 70° beam angle (no optics); 20°x60° beam angle (narrow optics)
End-to-end connectors
Mounting bracket allows for simple 180° rotation in 10° increments
Receives line voltage and data from Data Enabler

iColor Cove# MX Powercore is the highest-intensity member of the iColor Cove family. It applies Powercore# technology, which simplifies installation by integrating power and data management directly within the fixture, eliminating the need for external low-voltage power/data supplies.

12# (30.5 cm)
Technology provides uniform color mixing with maximized output
70° x 70° beam angle (no optics); 20°x60° beam angle (narrow optics)
End-to-end connectors
Mounting bracket allows for simple 180° rotation in 10° increments
Receives line voltage and data from Data Enabler

Single-ended metal halide lamp
Lamp power: 575 W
Lamp current: 6.95 A
Colour temperature: 6000 K
Luminous flux (Nom): 49,000 Lm
Luminous Efficacy (Nom): 85 Lm / W
Socket: G22
"Hot Restrike" capable

Vidare information
Construction Type Single pin socket
Power in Watts 575 W
Socket G22
Color / Color temperature [K] 6000 °
Type MSR

The XOP 15 A is a high quality xenon lamp. It features high output and long service life. The xenon output spectrum matches daylight closely and guarantees excellent results. Short arc xenon lamps made by Hamamatsu in Japan are available as well as Philips, Ushio and Superior Quartz short arc xenon products. Lamp Express is at the forefront in the solar panel manufacturing industry, as we supply custom xenon solutions for solar panel quality control equipment This high performance lamp has an output of 121 WPI.
The 395 mm long XOP 15 A has a factory warranty of 600 hours.
Lamp Express continues to manufacture hard to find lamps for equipment. No other company has the capability to source or manufacture these lamps like Lamp Express.

Description Value Unit
Product Type Original Dr. Fischer/Philips Lamp
Wattage 1500 W
Power Density 48 W/cm
Diameter 11 mm
Spectrum XE
Ozone free No
Length 395 mm
Arc Length 310 mm
End Cap Ceramic-A3
Wire, left 115 mm
Wire, right 115 mm
Terminal Ring
Lifetime 600 h
Minimum Order Quantity 6 lamps
Notes Used in Martin Atomic 3000 DMX

24 Playback Faders
24 Flash, Go/Back , Select Buttons
Full Electronic Legending
Connect to MagicQ Consoles
Connect to MagicQ PC or Mac
Up to 8 Wings per System
Dual Playback Sections
Split Playback Pages
Separate Page Up/Down Buttons
USB Connection
Dimmable LED Desk Lamp
Armrest Storage Compartment

Extend your MagicQ Console with one or more Playback wings. Each Playback Wing has two banks of 12 Playbacks, each individually paged. MagicQ Playback Wings connect to MagicQ Consoles via USB. No extra software required, just connect the Wing to the Console, enable the wing in the Console options and the Playbacks are ready to control your show.

MagicQ Playback Wings can be used on MagicQ PC systems together with MagicQ Mini, Maxi or standard PC Wings using the same MagicQ PC software. With up to eight Playback Wings you'll never run out of playbacks. A flight case is available to purchase for the Playback Wing otherwise it will be supplied with a shipping case to protect the wing while in transit.

Supported by MQ40, MQ60, MQ70, MQ100, MQ200, MQ300 series consoles.

24 Playback Faders
24 Flash, Go/Back , Select Buttons
Full Electronic Legending
Connect to MagicQ Consoles
Connect to MagicQ PC or Mac
Up to 8 Wings per System
Dual Playback Sections
Split Playback Pages
Separate Page Up/Down Buttons
USB Connection
Dimmable LED Desk Lamp
Armrest Storage Compartment

LCD Displays: 6
Faders: 24
Flash Buttons: 24
Playback Buttons: 52
Dual colour dimmable Desk Lamp: 1

Width: 465mm
Depth: 580mm
Height: 180mm
Weight: 5kg

12 Universes
10 Playbacks
Complete Console Solution
In-built UPS

The MQ100 Expert is the original ChamSys console featuring the familiar and flexible GUI lighting control, media server connectivity options and in-built Pixelmapping for LED. MagicQ Expert utilises the same software and show formats as the MagicQ Pro consoles enabling compatibility between all products in the entire MagicQ range.

Measuring just 625mm by 580mm it fits comfortably into even the smallest of FOH control positions. With its large in-built colour touch-screen there is no need for external monitors - the control is at your fingertips. Each of the ten theatre style playback controls is electronically labelled to show the current and next steps in the Cue Stack. Eight rotary encoders make controlling individual parameters simple. The MQ100 Expert supports effortless playback of pre-programmed shows whilst allowing instantaneous over-ride via the powerful MagicQ programmer for "busking" those unexpected moments.

MagicQ MQ100 Expert supports twelve universes (up to 4 direct from the console, up to 12 via Ethernet). With access to up to 202 playbacks through virtual playback controls the MQ100 Expert can handle even the most complex of shows.

Should more playbacks faders be required for a particular show, just connect one or more MagicQ Playback Wings, Execute Wings or Extra Wings. MagicQ supports ArtNet, Pathport and ACN Streaming DMX protocols. MagicQ MQ100 Expert provides an immensely powerful control console in a compact size. Ideal for easy transport, and fitting into small spaces, MQ100 Expert is the console of choice for controlling lighting, video and LED.

Full theatre cue stack control on 10 different playback faders makes easy work of complex shows. Individual channel timing, fully configurable FX, and on screen cue editing enables total artistic freedom. The on screen windows allow instant access to palettes, range information and FX for those moments when busking is required.

Tracking / non-tracking option
Fixture, FX and Gel library
In-built fixture editor
In-built media engine
LED pixel mapping
Fixture morphing and cloning
Rainbow colour picker (CMY, RGB, HSI)
Individual fade times on any channel
Easy fanning of parameters and times
Configurable faders - HTP, LTP, speed, size, masters
Theatre mark cues, split fades and inhibit masters
Client/server network architecture
Multiple console playback tracking
In-built web server
Remote console control
Visualiser support (including patch transfer)
Architectural zoning and day/date support
In-Built UPS (~15 mins)
Handy armrest storage compartment
MIDI & SMPTE option

Universes: 12
Channels: 6144
Number of fixtures: Up to 6144
Cues: 5000
Cue Stacks: 2000
Palettes: 3096
Groups: 5000
Numbers of shows: Virtually unlimited
Media Server support: 50 (each different content)

Encoders: 8
Faders: 13
Network ports: 1
USB ports: 3
Direct DMX512 ports: 4
External monitor ports: 1, duplicates in built screen
Dimmable LED console lamps: 2
Power input: 110 to 240 VAC

Width: 625mm
Depth: 580mm
Height: 180mm
Weight: 15kg

Flightcased dimensions:
Length: 670mm
Width: 750mm
Height: 270mm
Weight: 30kg

Congo jr – all the functionality of ETC’s Congo lighting control console, but in a smaller, compact footprint! (And add further functionality when you want it with Congo jr’s Master Playback Wing.)

Congo jr’s sleek modular 19" design packs in the identical channel and output counts as the original Congo console, while fitting into smaller venues like rehearsal halls, blackbox theaters, smaller TV studios, tiny lighting booths or space-starved touring trucks. Running Congo’s potent operating software, Congo jr is a fully independent main console or a convenient back-up desk.

Like Congo, Congo jr maintains the simplicity of a classic control system with the feature-rich functionality of a dedicated moving lights console. Congo jr gives you clean functions for everyday theater work with conventional lights, plus advanced control of hundreds of moving lights, without mouse operations or computer menus. Like the sophisticated but deadline-driven lighting shows it controls, Congo jr is high energy -- with short commands for fast results.

As with Congo, Congo jr lets you move independent channels such as worklights, conductor lights, followspot and smoke machine control to a special section that isn't affected by the rest of the system. You then see the important information, at any time, on the screens or in the console displays. And you can control your rig remotely, with your own cordless phone.

With Congo jr’s unique optional Master Playback Wing, you gain full access of the 80 Master Playbacks and the Direct Selects. The Master Playback Wing can be connected directly to either side of the console, or it may be used independently via a USB cable, giving you the freedom to configure your control area any way you like.

Simple, intuitive and innovative lighting control with a big brain for complexity wherever it arises. Congo jr – like its parent Congo -- handles the future without forgetting the past. Congo and Congo jr are ideal solutions for theater, house-of-worship, broadcast, club-system, concert and special-event lighting.

More information about compatible touch screen monitors...

Congo jr Software Features
Multiple formats for all channel views, including graphical channel layouts
Channel purpose database with auto groups
Special Jam mode for busking with moving devices (with optional Master Playback Wing)
Direct Channel mode (with optional Master Playback Wing)
Client/server networking and synchronized backup
Electronic manual with User Profiles
Product Features
Supports up to two monitors, DVI or SVGA
Built-In LCD display for softkeys and moving light control
Up to 3072 devices/channels and 6144 outputs/parameters
2 x DMX512 direct outputs, RDM ready
Ethernet (Avab protocols, ETCNet2, Net3/ACN, ArtNet)
USB memory stick
Hard disk memory
Show import via ASCII
MIDI In/Out
Contact closure triggers
USB multipurpose bus (memory, pointing device)
Audio In/Out
Phone remote control

Congo® jr Master Playback Wing

For those times when you need quick access to channel faders or multiple cue lists, the Congo jr Master Playback Wing is just the thing. With its 40 faders and master keys, the Master Playback Wing provides physical access to Master Playbacks, including the LCD displays for labeling and all master, flash and paging keys. Additionally, the Wing can be switched into Direct Select Mode, providing access to the 40 direct selects. It also features the Channels-Only/Masters/Jam switch, giving you all the flexibility of the Congo console in a significantly smaller footprint.

The Master Playback Wing is a modular accessory for Congo and Congo jr lighting control consoles. It may be used as a stand-alone wing connected to either console with a provided USB cable, or when using Congo jr it may be physically connected to either side of the desk. An external power supply, provided, is required when used stand-alone.

The Master Playback Wing is ideal for broadcast and studio applications where quick manual lighting is required; and school and worship venues where less technically skilled staff need to be able to easily change lighting without keystroke-command knowledge. It’s also recommended for use whenever Congo jr is serving as backup console to a Congo, and fader access is paramount. Modularity allows the user to employ the Wing during show setup or programming and then remove it conveniently when it is no longer required for playback.

1 x 3ch dimmer, 3 x 100W lamps, 1 x case

Stand alone FX

Create a unique and safe fire effect. The perfect mood light for home, club, display, haunted house, or party. Small flame effect.

The Q1131- Corrective and Creative Acoustic Control - for Sound Reinforcement, Recording and AV applications.

Order fiber cable seperatly
HMML-0034K3 is an ultra-miniature transmitter/receiver pair for HDMI signal transmission over 300 meters of optical fiber up to 4K/30. The transmission is done by multi-mode OM3 fiber which is clipped directly onto the transmitter and receiver with LC connector. HMML-0034K3 is ideal for HD and UHD real-time transmission over 100 meters in professional environments: business, congress, education, hospitals, broadcast, security,...

Long distance UHD transmission
Real-time EDID and HDCP transmission
Up to 300 meters per fiber OM3 Multi mode
Supports resolution up to 4K (3840x2160) at 30Hz
HDMI 1.4
Ultra compact

This lightweight pole-operated fresnel is well suited to both studio and theatre environments.

Max Power: 80W
Voltage: 230V
Lamp socket: G13 Med Bipin
Lamp type: 60 cm T12 40W KinoFlo True Match
Lamp typical CRI: >95RA
Lamp control: Analog ON/OFF - two switches
Ballast type: external flicker free LO/HO
Cable length ballast to head: 7m
Lightweight polypropylene housing
Fixture size: 70 x 20 x 7.5 cm
Weight: 2 kg

Max Power: 150W
Voltage: 230V
Lamp socket: G13 Med Bipin
Lamp type: 120cm T12 75W KinoFlo True Match
Lamp typical CRI: >95RA
Lamp control: Analog ON/OFF - two switches
Ballast type: external flicker free LO/HO
Cable length ballast to head: 7m
Lightweight polypropylene housing
Fixture size: 130 x 20 x 7.5 cm
Weight: 3.4 kg

Visual Parameter
Pixel Pitch 4mm
Brightness 1200nits
LED configuration SMD 3528 3in1
Pixel Density 62500 pixel/ m2
Viewing angle (horizontal) 140°
Viewing angle (vertical) 140°
Recommended viewing distance 4m to 75m
Performance
Lifetime 100,000hours
Power consumption(Maximum) 180W
Power consumption(average) 90W
Processing 12-bit per color
Color 281trillion
Refresh rate Hz
Scan mode 1/8 scanning
Input voltage 90~ 260VAC, 50/60Hz
Mechanical
Cabinet material Aluminum
Protecting louver Rubber
Weight 9.0kg
Mounting Rigging
Max rigging load 12 cabinets
Cabinet dimension 480 W * 480 H * 50MM D
Cabinet resolution 120 * 120
Load weight on surface N/A
Humidity range 10% to 99 %
Protection rating IP 40 Front & Rear
Control Parameter
LED processor NovaStar
Controlling distance 100m via CAT05 / Maximum 10km via Fiber Optic (Single mode)


It is probably the first design in the industry that integrated the same structure of indoor rigging, outdoor rigging and floor display. This special design will give you the most flexibility for any show, such as an indoor motor show, a concert touring with floor display, or an outdoor business event.
Furthermore, the Sharp series LED display screen is made from integrated aluminum mold. This integrated design enables an efficient thermal conductivity and easy installation on its super slim body. Currently, the Sharp series LED display screen includes 6mm indoor display, 10mm outdoor SMD display and 10mm floor display.
There are many reasons why our Sharp series LED display screen is running far beyond other similar products in the industry.
Features
1. Full protection under harsh environment
The Sharp series LED display screen is made from aluminum mold of strong and precise structure.
2. Slim and light
It could be one of the thinnest LED displays in the industry, coming with a depth of only 50mm and a weight of only 9.5kg. You can carry two panels at one time. Your installation stuff could not be more satisfied.
3. Fan-less design makes a quite display
Thanks to the integrated mold design, the thermal conductivity is very good and we could get rid of fans cooling. This quite display is very important for some of your event like concert touring.
4. High power efficiency
Unlike most of the product in the industry, we designed a double layer power supply system which is connected with AC-DC and DC-DC. This system enhances the power transforming efficiency to a high level of 83%.
5. Easy and fast installation
The interlock system allows for fast and easy installation, no complicated tools needed.
6. Unbeatable color performances
10mm Sharpe series LED display screen is equipped with MBI5042 16bit diving IC, DBSTAR controlling system. The high refresh rate, vivid color processing guarantees you a high-end broadcasting show.

Hippotizer HD
High Definition media playback is becoming more and more accepted as the default resolution for large scale projection and display of media. There are plenty of players out there that will do the job. But what if you want the quality of true High Definition media playback but with the realtime functionality of a Hippotizer media server? Let us introduce you to the Hippotizer HD.

Sample descriptionHippotizer HD is the most powerful media server on the market today. As with all Hippotizer servers, you can add effects, manipulate the media with thousands of combinations and all without compromising the rock-solid playback engine at the heart of the system. For many devices the strain of large HD format files means unreliable playback and trade off in quality. The Hippotizer HD uses the latest hardware and highly optimised software to ensure your quality isn't compromised when you want to push the envelope.

Add effects, rotate, colour and scale your media. Do all this in realtime from the built-in timeline with confidence. Connect together several Hippotizer HDs using HippoNet and you have the controls to create events on scales previously only dreamt of.

Hippotizer HD drives some of the world's most acclaimed theatre, television and Rock 'n' Roll projects. Because it delivers time and time again, day in, day out, it's track record is proven and our new Hippotizer V3 software elevates this to new heights.

And our onboard media engine respects the resolution of added media, so if you occasionally need to use Hippotizer HD for smaller projects it will always be ready, working for you time and time again but with the headroom to tackle the monster tasks when needed.

Technical
Selected technical specifications, for the full spec please download the pdf file below.

Keystone and ScreenWarp for non-linear projection surfaces
Soft-edge blending
Timeline for stand-alone operation
External control via DMX/ MIDI/ TCP-IP/ OSC/ RS232
High performance 3D show visualisation integration via CITP and HMap2
New visual presets applicable across all layers
XFade - A/B mixing with preview and output on same layer
Map to the most complex LED setups using RegionMapper and the award winning VideoMapper
Create stunning multi-screen shows with UberPan controller driving upto 12 render modes.

HippoCritter
With the HippoCritter Rackmount, you can do everything you can do with its bigger brothers. If you only need to run 4 video layers and you don't need dual/pan output or HD media then the HippoCritter Rackmount might be the solution for your project.

You get built-in Media encoding, full Timeline capabilities, full effects banks, and over 35 components, all without compromise. And because the HippoCritter Rackmount supports full HippoNet functionality it will integrate fully into any project big or small.

The HippoCritter Rackmount retains all the engine elements so you'll still get rich media playback up to a resolution of 720 x 576 and our highly acclaimed frame-blending too. You also get the addition of built in composite video capture functionality.

Why use a sledgehammer to crack a nut? The HippoCritter packs a punch without hitting your budget.

Technical
Selected technical specifications, for the full spec please download the pdf file below.

Single output 1280 x 720
Class leading video playback and real-time rendering
4 media layers (+4 mask layers)
PixelMapper with unrestricted number of output universes
Map to the most complex screen setups using the RegionMapper and the award winning VideoMapper
1U rackmount case
Optional patch panel for professional connections

Sharpy is a 189W moving beam light with an unprecedented brightness usually achievable only with far greater wattages. Weighing just 16 kg, Sharpy produces a perfectly parallel, laser-like beam with an incredible output of 59,760 lx at 20m. 5,100 footcandles at 65 ft. Sharpy is also groundbreaking for the purity of its beam, which is sharply defined and free of any halo or discoloration around the edges. It offers 14 different colors and 17 gobos, allowing you to change the shape of the beam and create an array of spectacular mid-air effects. With its light weight and modest footprint, Sharpy is small enough to be fitted anywhere – on trusses at live and TV events, on stage, in showrooms or conference rooms.
Sharpy is also available in a shiny mirror-finish chrome version, adding glamour to sets while making lights a less invasive presence.

189W Platinum 5R discharge lamp
Perfectly parallel, laser-like beam, sharply defined and free of any halo
Unprecedented brightness – comparable to wattages many times higher 59,760 lx at 20m
Adjustable beam angle from 0 to 3.8dgr
Interchangeable color wheel with 14 fixed colors
Interchangeable gobo wheel with 17 fixed gobos
8-facet rotating prism
Mechanical dimmer
Frost Filter
Rapid and extensive pan and tilt movements
New, high-performance electronics
Patented Italian design
Small, lightweight and easily transported only 48 cm x 16 kg
Eco-friendly replaces far larger and more expensive spotlights
Electronic ballast fitted as standard

POWER SUPPLIES
INPUT POWER
350VA at 230V 50Hz
LAMP SOURCE
Discharge lamp with a short arc burner in a reflector system
- Type: Philips MSD Platinum 5R
- Output Lamp power: 189W
- Colour temperature: 8,000 K
- Luminous flux: 7,950 lm
- Average life: 2,000 h
OPTICS
3-lens HQ optical group (patent pending)
Zoom: from zero to 3.8dgr
Focus: electronic
Light output at 20 meters (65 feet): 59,760 lux
COLOR SYSTEM
Interchangeable color wheel with 14 colors + open
EFFECTS SECTION
Interchangeable gobo wheel with 17 fixed gobos + open
High speed shake effect
8-facet rotating prism
Frost filter
Mechanical shutter and adjustable speed strobe effect
Mechanical dimmer
CONTROL AND PROGRAMMING
Max 20 DMX 512 control channels
DMX protocol signal: USITT DMX 512
Display: Graphic LCD backlit b/w Display
Pan/Tilt Resolution: 16 bit
Movement control: vectorial
DMX signal connection: 3 and 5 pole XLR input and output
Software upload through DMX input
BODY
Aluminium structure with die-cast plastic cover.
Two side handles for transportation.
Device locking PAN and TILT mechanisms for transportation and maintenance.

MOVING BODY
Travel:
- PAN = 540dgr - TILT = 250dgr
Maximum speeds:
- PAN = 2.45 sec
- TILT = 1.30 sec
Resolution:
- PAN = 2.11dgr - PAN FINE = 0.008dgr
- TILT = 0.98dgr - TILT FINE = 0.004dgr
Automatic repositioning of PAN and TILT after accidental movement not controlled by control unit.
ELECTRONICS
Long life self-charging buffer battery
Pre-set macros
Function reset from the lighting desk
ON/OFF lamp control from the lighting desk
"AUTOTEST" function from menu
ETHERNET ready
Electronic monitoring with status error
Cooling system monitoring
DMX level monitoring on all channels
Internal data transmission diagnostics
Firmware upgrade with no power
Firmware upload from another fixture
SAFETY DEVICES
Bipolar circuit breaker with thermal protection.
Automatic break in power supply in case of overheating or failed operation of cooling system.
Forced ventilation with axial fans.

MAC TW1™ Specifications

The MAC TW1 is a powerful, silent tungsten wash light with a clean, even, soft-edged beam, a motorized zoom, exceptional and rich CMY color mixing and can be run from the built-in dimmer or from an external dimmer.

Features
Total output up to 14200 lumens
CMY color mixing system
Motorized zoom
Fresnel (included), narrow, and multi array
Internal & external electronic dimming plus mechanical dimming
Rapid strobe effects (up to 10 Hz)
Patented very low-noise cooling
Various front accessories for theatre, television and film applications
80 V dimmer for universal operating voltage

Physical
Length: 454 mm (17.9 in.)
Width: 362 mm (14.3 in.)
Height: 709 mm (27.9 in.), head straight up
Weight: 26.8 kg (59.1 lbs.), IGBT dimmer model
Weight: 27.4 kg (60.4 lbs.), 80 V dimmer model

Lamp
Type: 1200 W tungsten halogen
Approved lamps: Philips 1200/115, 1200/230 or 1200/240 FastFit, Philips Hi-Brite 1200/80 FastFit
Socket: PGJX-50
Lamp voltage must match internal or external dimmer output voltage

Dynamic Effects
Color mixing: CMY, independently variable 0 - 100%
Electronic dimming: Multi-voltage IGBT and 80 V internal dimmer options, 'plug and play' external dimming
Mechanical dimmer: 0 - 100%
Shutter: Strobe effect up to 10 Hz, random strobe
Zoom: Narrow 14.5° - 27°, Standard 20° - 41°, Very wide 97° - 105°, 1/10 peak angles, 80 V lamp
Pan: 540°
Tilt: 242°

Control and Programming
DMX channels: 14/20
Setting and addressing: Control panel with display
16-bit control: CMY, mechanical dimmer, electronic dimmer, zoom, pan & tilt
Movement control options: Tracking and vector
Dimming curve options: Various available
Protocol: USITT DMX512-A
Receiver: Opto-isolated RS-485
Firmware update: Serial upload via DMX link

Dimming System Options
Internal multi-voltage IGBT dimmer: 0 - 100%, 8- or 16-bit dimming resolution, controlled via DMX
Internal 80 V dimmer: 0 - 100%, 8- or 16-bit dimming resolution, controlled via DMX
External dimmer input: Intelligent lamp power control

Construction
Color(s): Black
Housing: Magnesium alloy, UV-resistant fiber-reinforced composite
Reflector: Glass, cold light
Protection rating: IP20

Installation
Orientation: Any
Mounting points: 2 pairs of 1/4-turn locks

Connections
AC power input: 3 m (9.8 ft.) integral cable without power plug
DMX data in/out: 3-pin and 5-pin locking XLR
External dimmer: Neutrik PowerCon

Electrical
AC power: 100-120/200-240 V nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch-mode
Main fuse: 20 AT (slow blow)

QDMuX - 24 Channel DMX to 0-10V dc analogue demultiplexer

The QDMuX provides a remarkably-priced 24 channels of DMX to analogue decoding in a one unit rack-mount exterior. It is also a convenient interface between standards, the DMX line being connected through 5-pin XLR's to the front or 3-pin XLR's to the rear. Analogue outputs are in six channel groups on the front face and four channel on the rear.

The front panel alpha-numeric display shows the DMX start address, which may be set anywhere in the data chain, plus the current status of the programming options. In the event that a DMX line failure is detected you can opt for a total blackout, to hold the last input or to recall a previously stored scene.

Using the display in conjunction with the 24 output monitor LED's you can quickly verify whether a signal is being received and at what address.

Technical

Signal Input: USITT DMX512
Input Socket (Front): DMX512 via 5-pin XLR
Input Socket (Rear): DMX512 via 3-pin XLR
Link through (Front): DMX512 via 5-pin XLR
Link through (Rear): DMX512 via 3-pin XLR
Signal Output: +10v dc analogue (-10v version available)
10mA per channel
Output Sockets (Front): 4 x 8-pin locking DIN socket (female)
Output Sockets (Rear): 6 x 5-pin DIN socket (female)
Power Supply: 220-240v AC 50-60Hz
100-120v AC 50-60Hz version available
Dimensions: 1U (44mm) x 19" (482mm) x 165 mm
Weight: 3.5Kg

The MagicQ 3 Universe Ethernet Interface enables
control of lighting, video and LED via the
industry standard DMX512 control protocol.
Network connection is via professional RJ45
neutrik connectors for reliable and robust usage.
The MagicQ Ethernet Interface supports
input over Ethernet using the stanard ArtNet
protocol from MagicQ consoles, MagicQ PC or
any ArtNet compliant control console.
The MagicQ Ethernet Interface supports 3 separate
isolated outputs. Selection of ArtNet
sub-net and universe is carried out via two
separate thumbnail switches.
LED indicators identify power good, network
present and also ArtNet data for each of the 3
DMX512 outputs.
The new MagicQ Ethernet Interfaces take AC
mains power via a professional powercon connector
for reliability and ease of use.
bringing innovation and technology to lighting design
3 Universe Ethernet to
DMX Interface
MagicQ PC is the ultimate in PC based lighting
controllers for both live show control and off-line
show editing.
202 different playbacks accessed through
faders, buttons and the PC screen enable the
ultimate in playback control. Cue stacks on any
playback provides the flexibility required by the
power user.
And with full FX, personality and gel libraries
tied together with spreadsheet style editing of
show data, there is no limit to what you can
achieve.
Detailed programmer and cue contents windows
give confidence in your programming and
enables easy editing. Modify any programmed
FX parameter live for flexible busking.
A complete lighting control solution with free
software that you can easily carry in your hand
baggage onto the aeroplane!

CP 62 1000w som standard

110V bars
4x28V
With CEE 16 yellow 3-pin conector.

DSN 105 11°-23°DSN 105 11°-23°
Zoom Profile with Condenser Optics with :
• 2 zoom lenses and condenser optics
• GX 9.5 lampholder
• Set of 4 beam shaping shutters with heat insulated handles
• 2 m power supply cable (2 x 1.5 + 1.5 mm2) without plug
• 1 metal filter frame (185 x 185 mm)

Dimensions (A x B x C) : 790 x 340 x 420 mm
Weight : 15.1 kg

The Panasonic PT-DW6300ES Projector is a WXGA Large Venue Projector. This lamp based projector is capable of displaying 6,000 Lumens at its brightest setting with a native resolution of 1280x800 . The internal DLP technology touts higher contrast, less visible pixels and more portability. The unique projector lens has the ability to be shifted to allow greater flexibility in positioning the projector relative to the screen.

OVERVIEW

The PT-DW6300* features a high brightness of 6,000 lumens. New, unique functions also abound, such as the RGB Booster, which provides vivid color reproduction and high brightness, and the Auto Cleaning Filter, which eliminates the need for filter maintenance for a full 10,000 hours. All models have built in Multi-screen Support System such as Edge Blending. This all-round projector offers first-rate performance under a wide variety of conditions.

Vivid Picture Quality with High Brightness
• RGB Booster significantly improves color reproduction while maintaining high brightness
• Detail Clarity Processor, exclusive to Panasonic, realistically reproduces even fine textures
• System Daylight View 2 produces sharp, crisp images even in bright lighting

Easy Maintenance and Superior Reliability
• Auto Cleaning Filter reduces maintenance hassles for 10,000 hours
• Dual Lamp System supports 24/7 operation and prevents image interruptions even if a lamp burns out
• Liquid Cooling System allows use in ambient temperatures as high as 113° F
• Sealed Optical Block prevents the adverse effects caused by dust for greater operating stability

System Integration Flexibility
• Multi-Screen Support System includes Edge Blending capability to seamlessly connect multiple screens
• Flexible +/-360 Degrees Installation in the vertical direction for creative applications
• Powered Vertical/Horizontal Lens Shift Function increases installation flexibility
• Optional Lenses cover a wide range of projection distances
• 6,000 ANSI Lumens
• WXGA
• 16:10 Aspect Ratio
• DLP™ System
• 1280 x 800 pixels
• 2,000: 1 Contrast Ratio
• System Daylight View 2
• Auto Cleaning Filter
• Dual Lamp System

PT-DW6300ULS

The PT-DW6300ULS* features a high brightness of 6,000 lumens. New, unique functions also abound, such as the RGB Booster, which provides vivid color reproduction and high brightness, and the Auto Cleaning Filter, which eliminates the need for filter maintenance for a full 10,000 hours. All models have built in Multi-screen Support System such as Edge Blending. This all-around projector offers first-rate performance under a wide variety of conditions.

OVERVIEW

The PT-DW6300ULS* features a high brightness of 6,000 lumens. New, unique functions also abound, such as the RGB Booster, which provides vivid color reproduction and high brightness, and the Auto Cleaning Filter, which eliminates the need for filter maintenance for a full 10,000 hours. All models have built in Multi-screen Support System such as Edge Blending. This all-round projector offers first-rate performance under a wide variety of conditions.

Vivid Picture Quality with High Brightness
• RGB Booster significantly improves color reproduction while maintaining high brightness
• Detail Clarity Processor, exclusive to Panasonic, realistically reproduces even fine textures
• System Daylight View 2 produces sharp, crisp images even in bright lighting

Easy Maintenance and Superior Reliability
• Auto Cleaning Filter reduces maintenance hassles for 10,000 hours
• Dual Lamp System supports 24/7 operation and prevents image interruptions even if a lamp burns out
• Liquid Cooling System allows use in ambient temperatures as high as 113° F
• Sealed Optical Block prevents the adverse effects caused by dust for greater operating stability

System Integration Flexibility
• Multi-Screen Support System includes Edge Blending capability to seamlessly connect multiple screens
• Flexible +/-360 Degrees Installation in the vertical direction for creative applications
• Powered Vertical/Horizontal Lens Shift Function increases installation flexibility
• Optional Lenses cover a wide range of projection distances
• 6,000 ANSI Lumens
• WXGA
• 16:10 Aspect Ratio
• DLP™ System
• 1280 x 800 pixels
• 2,000: 1 Contrast Ratio
• System Daylight View 2
• Auto Cleaning Filter
• Dual Lamp System

The Panasonic PT-DW7000U Projector is a WXGA Home Theater Projector. This lamp based projector is capable of displaying 6,000 Lumens at its brightest setting with a native resolution of 1366x768 . The internal DLP technology touts higher contrast, less visible pixels and more portability. The unique projector lens has the ability to be shifted to allow greater flexibility in positioning the projector relative to the screen.

In frame, Order lens separately!

Light Output: 10,600 Lumens
Resolution: 1920 x 1200 WUXGA
Contrast Ratio: 10,000:1
Inputs:
1 x 5 BNC, RGBHV/Component
1 x DVI(HDCP)
1 x HD-SDI
1 x Composite
1 x VGA
1 x S-Video
Maximum Input: 1920 x 1200
3 Chip DLP 16:10 WUXGA
Geometric Adjustment, Mechanical Lens Shutter
Multiscreen Processor
Flying Weight: 36.9 kg

PT-DW6300ULS

The PT-DW6300ULS* features a high brightness of 6,000 lumens. New, unique functions also abound, such as the RGB Booster, which provides vivid color reproduction and high brightness, and the Auto Cleaning Filter, which eliminates the need for filter maintenance for a full 10,000 hours. All models have built in Multi-screen Support System such as Edge Blending. This all-around projector offers first-rate performance under a wide variety of conditions.

OVERVIEW

The PT-DW6300ULS* features a high brightness of 6,000 lumens. New, unique functions also abound, such as the RGB Booster, which provides vivid color reproduction and high brightness, and the Auto Cleaning Filter, which eliminates the need for filter maintenance for a full 10,000 hours. All models have built in Multi-screen Support System such as Edge Blending. This all-round projector offers first-rate performance under a wide variety of conditions.

Vivid Picture Quality with High Brightness
• RGB Booster significantly improves color reproduction while maintaining high brightness
• Detail Clarity Processor, exclusive to Panasonic, realistically reproduces even fine textures
• System Daylight View 2 produces sharp, crisp images even in bright lighting

Easy Maintenance and Superior Reliability
• Auto Cleaning Filter reduces maintenance hassles for 10,000 hours
• Dual Lamp System supports 24/7 operation and prevents image interruptions even if a lamp burns out
• Liquid Cooling System allows use in ambient temperatures as high as 113° F
• Sealed Optical Block prevents the adverse effects caused by dust for greater operating stability

System Integration Flexibility
• Multi-Screen Support System includes Edge Blending capability to seamlessly connect multiple screens
• Flexible +/-360 Degrees Installation in the vertical direction for creative applications
• Powered Vertical/Horizontal Lens Shift Function increases installation flexibility
• Optional Lenses cover a wide range of projection distances
• 6,000 ANSI Lumens
• WXGA
• 16:10 Aspect Ratio
• DLP™ System
• 1280 x 800 pixels
• 2,000: 1 Contrast Ratio
• System Daylight View 2
• Auto Cleaning Filter
• Dual Lamp System

Input:
230V Schuko
DMX5
RJ45

Output:
8 x XLR4 (24V)

Addressing by Zapi or computer with Colorkinetics software.

PDS-750 TR
PDS-750 TR is a power / data supply designed for LED-based entertainment and event lighting installations featuring ColorBlast® TR or iW® Blast TR fixtures.
Includes seven types of configurable visual effects. Onboard addressing capabilities eliminate the need for additional addressing tools or software.
Automatically accommodates input voltages ranging from 100 VAC to 240 VAC.
Shortcircuit protection prevents device failure due to incorrectly wired fixtures.
Heavy-duty steel and aluminum NEMA 1 (IP20) enclosure is ideal for use in temporary installations and harsh environments typical of entertainment and rental applications.

- Strand Cantata 18/32
- zoomable spotlight with variable beam diameter 18 to 32 degre

A DMX decode card is available as an option on both
Megastar and Deathstar strobes. This will provide a pulse
to fire the strobe when the 50% (MSB) DMX level is
detected, and so a chase will need to be programmed
on the controller to set the flash rate of the strobe. If the
dual edge trigger switch is in position ‘D’ then the strobe
will flash at twice the rate set on the sequence.
DMX in/through is via one male and one female 5 pin
XLR socket fitted to the rear of the strobe (see
photograph). There is a 10 way DIL switch for address
setting and single (S) / dual (D) edge trigger selection
(see above).
The sum of selected switches equal start address. The
card actually decodes two channels so the second
channel has been routed to the middle contact of the
stereo jack sockets marked ‘Flip-Flash output’, and may
be used to trigger a non DMX strobe from a DMX
controller.

TEST INFO
Here is the information of the item publiched on website.

Spot chair for lighting professionals. The spot chair is possible to mount to the structure by swivel couplers either by the bottom part or by the halo.

Beam angle clear 10gr.
Philips specar denna armatur som IP66 men av erfarenhet klarar den IP64

Beam angle clear 10gr

IP20

Beam angle clear 10gr

IP20

Order fiber cable seperatly
HMML-0034K6 is an ultra-miniature transmitter/receiver pair for transmitting the HDMI 2.0 UHD signal over 300 meters of optical fiber up to 4K/60. The transmission is made by multimode OM3 fiber which is clipped directly onto the transmitter and receiver with LC connector. HMML-0034K6 is ideal for 4K/60 real-time transmission over 100 meters in professional and residential environments.

Long distance UHD transmission
Real-time EDID and HDCP transmission
Up to 300 meters per fiber OM3 Multi mode
Supports resolution up to 4K (3840x2160 4:4:4:4) at 60Hz
HDMI 2.0
Ultra compact

L18 is a flexible and high density LED video display designed for both backdrop applications and creative LED formations. It's ultra-slim, flexible mesh construction offers the perfect combination of design flexibility and speed of deployment. The L18 can be shaped in any way or moulded over any object, but can equally be deployed as a flat LED video screen. With it's 18.75mm pixel pitch, 40% transparency factor, and light-weight design, the L18 enables show designers to create massive backdrops within a minimal budget - and have them installed with phenomenal speed.

LAMP: 5pcsX10W
Dimming: 0-100%
DMX Channel:
Certificate: CE&RoHS
Features: NEUTRIC CONNECTOR
Control Mode: DMX, Master/Slave
Control Features:
Create visuals in combination with pixelmap software
Effects: Beam and wash function optional

Keyword: 1X5 LED Matrix
1X5 LED Matrix
1.5pcsX10W(White)
2.NEUTRIC Power Input

The IPX Range combines a unique rapid dispersal system with a large vapour generating capacity The Smokecloak IPX25 is therefore ideal to provide protection in large volume areas such as warehouses, manufacturing facilities and utility premises.

FEATURES
1600M3 in 60 Seconds
800M3 in 30 Seconds
Attack resistant construction
Can be integrated with other Smokecloak Products
Flexible and adjustable mounting system.
Long hang time dry vapour production
Microprocessor controlled electronics
Rapid vapour dispersal system
Uses Smokecloak FL600 fluid

Specifications
dimensions: 1230 x 475 x 572 mm
weight (assembled): 32,5 kg
weight (installed): 67,1 kg
colour: black
fluid: 2 x 1 liter for ± 4000 m³ or 1 x 9,5 liter for ± 22325 m³
power supply: 200 - 250 Volt
consumption (heating mode): 2,5 Kw / 230 Volt
consumption (standby): 128 Watt
power saving mode: -
reaction time: 0,1 seconds
fog production: 800 m³ in 30s / 1600 m³ in 60s
timer interval: adjustable in 2 positions 1 - 25 minutes
warm-up time: 10 minutes
Cloacksensor: no
Interchangeable nozzles: no
self-purification after fog production: no
USB connection: no
Built in battery backup: 2 x 12 Volt - 2,2 Ah

Description
Packing Litepanels' LED technology into a classy slimline housing, the Litepanel 1x1 Standard modular lighting system 1'x1' of pure, soft, luminous, directional output.

Ergonomic control knob on the back enables instant dimming from 100% to 0% with minimal color shift.
Silent, flicker and heat free design lets you get close to a subject's face.

Sharpy Wash 330 is an extraordinarily compact, lightweight 330 W washlight, with the luminous efficiency, graphic and optical performance of a 1000W fixture. It is extremely silent and quick, and fitted with a complete CMY color system, special colors, 6.5°-48° zoom, mechanical dimmer, beam shaping filter and motorized top-hat. At minimum beam angle, the Sharpy Wash 330 produces a beam like its brother Sharpy: the two lights are designed to work perfectly together. It is an eco-friendly light, allowing considerable running and consumption cost savings.

New 330W Lamp (8,000 K 1,500 h)
Equalling the light output of a 1,000 Watt luminaire
Small, lightweight and easily transported: only 18.5 Kg (40.8 lbs)
Adjustable beam angle from 6.5° to 48°
Motorised Top Hat (Clay Paky patented)
CMY Color System + 11-color wheel + open
Rotating beam shaper
High speed movements and effects
Frosted, smooth mechanical dimmer
High speed Stop/Strobo effect
Soft-edge Filter + heavy frost filter
New, high-performance electronics
Art-Net / RDM
Patented Italian design Eco-friendly: replaces far larger and more expensive washlights
Electronic ballast fitted as standard

The Strand Cantata is an excellent 1.2kW zoom profile, great for school halls and community venues.